MODUS-4T
Modus-DYN
Dynamic flow balancing user module.
Pre-assembled user modules group all components for:
- room temperature regulation
- user circuit distribution manifolds
- user consumption accounting.
MODUS-QS
User module for 2-pipe systems
Application
Module suitable for all central heating or heating/cooling systems.
Execution
The modules are available in the following versions:
- DI – Built-in version with lid
- DP - Wall execution for cavedio
Special electrothermic actuator
Electrothermic actuators compact on/off action electrothermic actuator compatible with thermostatable radiator valves, fan-coil valves and manifolds.
Available variants:
- CABLE LENGTH 2 MT
- CABLE LENGTH 3 MT
- CABLE LENGTH 0.60 MT WITH INSULATED FASTON
- CABLE LENGTH 1 MT WITH INSULATED FASTON
- VOLTAGE 110V
Standard electrothermic actuator
According to standards: CEI EN 60529:1997 + A1:2000
CEI EN 60204-1:2006
Terminal unit connection kit
Used in the most varied sectors of plant engineering: heating, air conditioning, water, sanitation and in general with any non-corrosive fluid.
Made of brass alloy “CR” – “DZR” conforming to EN 12165-CW602N-M. Nominal pressure: PN 25 Operating temperature: -10 ÷ 120°C Codes:
Made of brass alloy “CR” – “DZR” conforming to EN 12165-CW602N-M. Nominal pressure: PN 25 Operating temperature: -10 ÷ 120°C Codes:
- Cod.731 - 1/2X1/2
- Cod.731 - 3/4X3/4
- Cod.731 - 1X1
Terminal unit connections kit with filter and ball valve
Used in the most varied sectors of plant engineering: heating, air conditioning, water, sanitation and in general with any non-corrosive fluid.
Made of brass alloy “CR” – “DZR” conforming to EN 12165-CW602N-M. Nominal pressure: PN 25 Operating temperature: -10 ÷ 120°C Codes:
Made of brass alloy “CR” – “DZR” conforming to EN 12165-CW602N-M. Nominal pressure: PN 25 Operating temperature: -10 ÷ 120°C Codes:
- Cod.733/630YPL - 1/2
- Cod.733/630YPL - 3/4
- Cod.733/630YPL - 1
Thermostatable vitons
Thermostats for manifolds - fancoil valves - radiator valves.
Vitone versions: fixed gland gland nut with possibility of replacement without emptying the system.
Preset for preset or on-off flow. Rubber shutter with stainless steel retaining ring to avoid gluing with sealing seat. In addition, we make screws to design.
